Email

info@ohioroofingsupply.com

Address

Ohio USA

If you want to learn how to install roofing shingles yourself, a how-to video is an invaluable tool. Roofing shingles come in many different styles and types, so it is essential to know the best way to install them. The following video will teach you how to do this step-by-step. This video also explains how to nail the shingles in place. There are several different ways to install them, so watch the video carefully. roofing near me

The first step is to measure the length of your ridges and hips. Divide the length by 35 to determine how many bundles you will need. You can also multiply the length of your roof by 100 to get the exact number of squares. This will give you a rough idea of the number of shingles that you will need. The second step in the process is to mark the ends of the shingles with felt paper.

Next, install the underlayment. Make sure that the shingles overlap by 150 mm (6”) before nailing them into place. Install valley flashing (a metal covering that prevents leaks) using 28-gauge galvanized metal. Once these two steps are complete, you can start laying the shingles. You should also use flashing around chimneys, attic vents, and plumbing stacks. Make sure to install metal flashings in these areas and around chimneys. You can also protect your roof by using an ice and water protector membrane.

The next step is to install the roofing shingles in the field. Start at the bottom and work your way up. Start by laying starter shingles. As you continue, you will notice the shingles begin to overlap. Then, you can add ten percent to twenty percent for waste. Remember to wear safety gear for your safety and that of those on the ground. Work on a flat course, following the manufacturer’s instructions.

After the shingles have been installed, cut the shingles that are at the end of the row. Trim off any excess shingles after nailing. Repeat this procedure for the fifth row. Then, place a full shingle at the chalk mark. If you are installing a hip roof, make sure that you allow for an overhang of at least the tab width at the ridge. This step is very similar to the first row.

If you are confident in your roofing skills and able to read a roof installation video, you can easily complete this task yourself. It is a big project, and a knowledgeable do-it-yourselfer can do it with the proper tools. As long as you follow the manufacturer’s instructions and safety precautions, it is possible to complete the project without professional help. In this video, IKO PROFORMAX Integrated Roofing Accessories provides an overview of how to install various elements of a roofing system.