If you are planning to use galvanized steel roofing as a roofing material, it is necessary for you to know how to cut the sheet. First, you need to know the size of the roof. This will determine how to cut the roof. After that, you need to clean the roofing panels to prevent the accumulation of metal dust. The dust can weaken the roofing material. Using a vacuum cleaner will eliminate the metal dust.
There are several options when it comes to cutting corrugated galvanized steel sheets. Both manual and power options are available. Before cutting the sheet, wear appropriate PPE to avoid injury. Also, make sure to mark the sheet before starting the cutting process. Make sure to work slowly and steadily. It is important to know how to cut corrugated sheets so that you can avoid damaging them. The Metal Roofing Alliance recommends following a few tips when cutting galvanized steel sheet.
Before cutting metal roofing, make sure you have the proper cutting tools. A sharp blade is vital in cutting metal roofing. A wood knife is not recommended for this job. Alternatively, you can use a high-speed skill saw or a circular saw. Make sure to check the dimensions of the roof before cutting. After cutting, be careful not to cut the roof too thin because you might end up with metal dust. Metal dust can weaken the roof over time. The dust can also be dangerous, so use the appropriate safety equipment.
Once you have determined the right size, use a sharp blade to cut the roof. You may need to reposition the panels in order to avoid blocking the blades. A sharp blade can easily damage the roof, so use caution when you cut the roof. This step is essential for protecting yourself from injuries. When cutting metal, always use appropriate protective gear. Wear long-sleeved shirts, pants made of fire-resistant materials, and puncture-resistant gloves.
When using tin snips, make sure that the blades are parallel to the metal sheet when you’re cutting. This ensures that the metal sheet is fed straight into the snips. If the snips are off-set, the metal sheet may catch and bend. This will ruin your roof’s appearance. So, make sure you use tin snips for cutting. Just keep in mind that practice makes perfect.
Electric shears can make quick and precise cuts. However, they can also bend the metal. If you’re doing a custom job, it’s better to invest in a double-sided cutting shear. This tool is more expensive but will ensure a more precise cut. Electric shears have a built-in mechanism that resets if it becomes stuck. You can also buy a hand-held circular saw, which is better for cutting large sections of metal roofs.
