If you’re wondering how to apply torch down roofing, this article will help you. First, you’ll need to clear the area on your roof. If necessary, use a hard-bristle brush or leave blower to get rid of the big dirt. Be sure to use a ladder that’s stable, too. You’ll need to work safely while torching down roofing, and you’ll need to follow certain safety guidelines. Roofer Powell
While the durability of torch-on roofing is impressive, you should keep in mind that a poorly installed roof may lead to leaks and damages. This is why you should choose a reliable roofing company with a proven track record and make sure their employees have the proper skills and equipment. Though all types of roofing systems have their flaws, the ones used by torch roofs are surprisingly reliable. Listed below are some tips to make sure that your new roof will last for many years.
Start with the base sheet. You’ll need an overlay board to hold the torch down material. Afterward, the roofer will need to heat the underside of the cap sheet. Once the cap sheet is hot enough, it should be pressed onto the base sheet. After it cools, it will be covered by the third layer of torch down roofing, which has granules. As you can see, torch down roofing is a simple process that requires very little expertise.
The materials needed for this project are straightforward and inexpensive. You’ll need a propane torch and protective clothing. You’ll also need a hammer, drill, ruler, cutter, spark igniter, and bitumen primer. Lastly, you’ll need to measure your roof. To determine which size torch down roofing you need, consult a dealer. They’ll be able to offer advice. And remember: safety is the top priority!
As for the thickness of torch down roofing, the sheets are significantly thicker than standard PVC membranes. Torch down sheets are often three times thicker than standard PVC membranes. Because the sheets are thicker, the heat from the interior of the house moves out and back again to the exterior, condensation occurs. If you choose a torch down roofing of light color, the lighter color will reflect the sun and rot the interior of the home. However, darker colored roofs will reflect the solar rays, vaporize the moisture from condensation, and provide a protective layer to the home.
When choosing a torch down roofing system, keep in mind that the process is easier with hot than with cold. The heated membrane is tougher, and requires more steps, but the result is worth it: fewer seams will allow water to seep through. The adhesive also bonds better with itself, resulting in a tighter seal against water and leaks. This can save you money and energy costs. And as a bonus, the material will last longer.
Once you’ve determined the thickness of the membrane you’ll use, you can proceed to the next step: installing the first row of sheets. Place the first row on the low part of the roof, aligned with the ridge of the roof and about three inches over the base sheet. Start rolling and apply heat to the top row of sheets. You can then repeat the process for the next row of sheets. In case you have a thick membrane, use a sharp blade to cut it.
