Email

info@ohioroofingsupply.com

Address

Ohio USA

How to Cut Polycarbonate Roofing

You might be wondering how to cut polycarbonate roofing sheets. You should know that this material is made of plastic and comes in different thicknesses. The thinner sheets are easier to cut, but the thicker ones will take longer to cut. You can either buy a power...

How Much PSI For Roofing Nailer

Before you use a roofing nailer, you should know how much psi it should have. A low psi will leave the nails sticking out of the roof, whereas a high psi will push them deeper into the roofing, damaging the shingles and possibly damaging the nailer as well. To avoid...

How to Remove Roofing Tar From Concrete

There are several ways to remove the stain, but none are guaranteed to work perfectly. A few steps should be followed, though. First, you must protect yourself from the acid used in tar removal. Wear protective clothing, including rubber gloves and eye protection....

How to Remove Roofing Tar From Clothes

One of the most important things to know about removing tar from your clothing is that tar is very sticky. You should be wearing protective gear, including gloves, to prevent the tar from getting on your skin. Next, gather the tools you need to clean the stain,...

How Far Should Roofing Nails Penetrate?

There is no exact standard for how long a roofing nail should penetrate, but you should allow a minimum of 19 mm to penetrate the sheathing or roofing material. For example, nails that penetrate one inch into a 3/8″ layer of sheathing may not penetrate the roofing...