Email

info@ohioroofingsupply.com

Address

Ohio USA

CONTACT US

How to Apply Roll Roofing to a Flat Roof

by | May 21, 2024 | Blog

Before beginning, you’ll need to measure 35 inches from the bottom edge of the roof and mark the area with a chalk line. Make sure you use a meter stick so that the line is straight and avoids overlaps or crooked roofs. As you work, spread roofing cement evenly over...

What Is the Best Gauge of Metal Roofing?

by | May 21, 2024 | Blog

Metal roofing is made from a variety of materials, but the decision as to what is the best gauge will depend on several factors. Gauge describes the thickness of the panel, and higher gauges are generally thinner. In general, the thicker the gauge, the stronger and...

How to Cut Galvanized Steel Roofing

by | May 21, 2024 | Blog

If you are planning to use galvanized steel roofing as a roofing material, it is necessary for you to know how to cut the sheet. First, you need to know the size of the roof. This will determine how to cut the roof. After that, you need to clean the roofing panels to...

What Do You Cut Metal Roofing With?

by | May 21, 2024 | Blog

There are several different tools to cut metal roofing panels. Which one is right for your project will depend on the type of cut you need to make. Precision metal roofing cutters are best for cutting metal panels, as they cause very little distortion. Metal nibblers...

What Is R Panel Metal Roofing?

by | May 21, 2024 | Blog

An R panel is a type of commercial metal roofing panel. This type of roofing panel is composed of four one-inch ribs and a flat center area. It is commonly used for pre-engineered steel buildings. R panels are low-maintenance and easy to install. They are also...