If you are looking for an easy way to improve the appearance of your roof, you may be wondering how to install rolled roofing over shingles. The first step is to measure the eaves on your roof. Some roofs have eaves that are not equal in height throughout. After measuring, cut the roll roofing material so that it is 36 inches wide or 1 meter in width. You should then apply roofing cement to the entire surface, and secure the rolls with roofing nails. metal roofing supply
Measure your roof carefully to ensure a proper fit. You will need to determine the exact dimensions of your roof, which may require the assistance of a professional. If you do not have a measuring tape, you can ask a friend or family member to help you. A square or rectangular roof is easier to measure, so multiply the width by the length to determine the area. Once you have the exact measurements, you can begin preparing your roof for the installation of the rolled roofing.
To start the process, you should mark the edge of your roof 35 inches below the top eaves. Use a chalk line to mark the line. Then, use a trowel to spread roofing cement along the edges. Continue applying roofing cement until the desired thickness is reached. Be sure to put on gloves when working with the roofing cement. When installing the second layer, measure 32 inches above the first layer.
Since rolled roofing is not very durable, it is best to use it on roofs that aren’t damaged heavily. Even small cracks can undermine the integrity of roll roofing. Clean your existing roof and remove any debris that may be on it before applying the new one. Before applying roll roofing, install a layer of roofing felt to create a stable base for the new material. Once the roll roofing has been installed, apply it to the bare roof sheathing as you would with the shingles.
You may think that roll roofing is too expensive for you, but that’s not the case! It’s actually one of the cheapest roofing materials on the market, and it is easy to install. If you’re unsure of the process of installing roll roofing, hire a professional to do the job for you. You’ll be glad you did. There are many advantages to roll roofing, including affordability and ease of installation. It also makes it a great choice for smaller buildings and those with low incline.
If you’re worried about the cost, roll roofing is a good choice. It’s cheap and lightweight, and you can DIY the installation. However, you’ll need to be aware that rolled roofing isn’t as durable as asphalt shingles. This is why you should consider the pros and cons of rolled roofing before making the decision. Take a little time to compare prices and benefits before making a decision.
